Scope
- Video cameras
- Immersion flight
- Variometer
- Data logger
- Illumination systems, etc.
Manufacturer: FE-Flighttech
www.fe-flighttech.ch
Picture gallery
Please click for enlarging the pictures on the picture. A Diashow starts automatically.
Instructions Lipo-Saver LS70/MC
Lipo-Saver_LS70mc_release_06_Instruction.pdf Here they find the instructions to the Lipo Saver LS70/MC in PDF |
Lipo-Saver LS70/MC 2S – 4S
Release 6
Protect your Lipo rechargeable batteries against damages through lower voltage.
Thanks to most modern digital technology with microprocessor, the LS70/MC recognizes the correct cell number itself. If the Lipo rechargeable battery reaches its critical least voltage, the consumer automatically is uncoupled. A pulsating is prevented. The consumer remains turned off, also if the rechargeable battery voltage increases again. The working conditions are evident through LEDs. With slightest dimensions and only 5 grams, the Lipo Saver can very individually be used. An ideal protection against deep discharge their Lipos in add-ons. Reference: The Lipo Saver is conceived for not security-related current consumers.
Ideally suited for the following scopes:
- Video cameras
- Immersion flight
- Variometer
- Data logger
- Illumination systems, etc.
Description
The LS70/MC recognizes self the correct cell number (2S-4S). Prerequisite is that the Lipocells are loaded correctly and completely. In the turning on, the cell number is indicated through blinking of the green LED. Example for a rechargeable battery with cells turned 3 in series (3S): Turn Lipo Saver (between rechargeable battery and consumer), green LED illuminates 2 seconds, then 3 times blinking (notice of the cell number), subsequently is engaged the consumer and illuminates the LED continually. In reaching of the lower voltage, the green LED turns off and the red LED blinks 20 times in the distance of 2 seconds. If a too high voltage, for example 5S more largely are connected or, an Error is released and is indicated with duration lamps of the red LED.
The new software release 5 prevents rapid activate of the Lipo-Saver at very short load of the batteries. (Start a engine, charge a capacitor etc.)
TYP | LS70/MC |
---|---|
Cell numbers (area) | 2 up to 4 Lipo cell |
Turn off voltage | 6.2 V at 2S 9.3 V at 3S 12.4 V at 4S |
Max. Current (permanent) | 10.0 A (5.0 A) |
Weight (with cable) | 5 g |
Dimensions | 11x25x7 mm |
Short circuit neutralizing | no |
Heat protected | no |
Own consumption with turned on consumer | < 8,0 mA |
Own consumption with turned off consumer | < 0,8 mA |
Green LED | Blink: Notices of the cell number Duration lamps: Consumers turned on |
Red LED | Blink (20 times): Consumers turned off: After that LED from Duration lamps: Incorrect cell number |
For operation and use of the Lipo Savers LS70/MC, each liability is rejected. Read our restrictions for use, retrievably on our web page.
Manufacturer: FE-Flighttech
www.fe-flighttech.ch