LED optics reflector
- LED reflector 10°, 25° for LEDs 300mA and 400mA cc
- LED reflector 40° for LEDs 300mA and 400mA cc
The reflector is for the extension of the 300mA and 400mA constant current LEDs. The LED optics is ideal, in order to build landing lights.
There are three types available. A reflector with 10°, 25° and 40° beam angle.
LED optics reflector
| Type | LED optics reflector for LED 300mA |
|---|---|
| Large diameter at the front on the reflector | 25 mm |
| Total height of the reflector | 18.4 mm |
| Lens | Polycarbonate |
| Mounting | with 2.5 mm pin at the foot of the reflector |
| Beam angle | 10°, 25° or 40° (three different types) |
LED optics reflector for ACL
- LED reflector ACL for LEDs 300mA and 400mA cc
The reflector is for the extension of the 300mA and 400mA constant current LEDs. The LED optics is ideally suited to build anticollisionlights (ACL). The optics spread the light around in a shallow angle and 360 ° around.
LED optics reflector for anticollisionlights
| Type | LED optics reflector for LED 300mA |
|---|---|
| Large diameter at the front on the reflector | 17.2 mm |
| Total height of the reflector | 13 mm |
| Lens | Polycarbonate |
| Mounting | with 2.5 mm pin at the foot of the reflector |
| Beam angle | Shallow angle, and around 360° |
Connector for the flightlightmodul
- Connector for the flightlightmodul
If you want to use their own lights, we offer a connector with cable for the connection to the Flightlight module.
Connector with cable
- Connector with cable
If you want to use their own lights, we offer a connector with cable for the connection to the Flightlight module. (One for each output)
Connector with cable
| Typ | Connector with cable |
|---|---|
| Connector (one for each output) | 2.54mm grid (for the Flightlight Modul) |
| Wire cross-sections | 0.25mm2 |
| Cable Length | According to your specifications |